The Minor Chord

C. F. Martin & Co.

C.F. Martin began his venture in 1833. Four generations later, Chris Martin IV is at the helm of this family business. Although there have been many changes over the past 178 years, one thing has remained consistent: C.F. Martin's commitment to quality. For over a century, Martin guitars have been considered the standard by which all others are measured.

The Minor Chord is proud to be an authorized C. F. Martin dealer. We always have a wide selection of Martin instruments for you to play and compare before you buy. Our prices are competitive with the national chains and reputable online dealers. If you are considering a C. F. Martin instrument and are within an hour's drive of our store, you owe it to yourself to pay us a visit!

For more information about C. F. Martin instruments please visit the C.F. Martin Company website.

Closeup of Martin HD-28

1996 D-45 Deluxe Commemorative

A local customer has asked us to sell this extraordinary instrument on his behalf.

This guitar is one of a limited run of 91 instruments built in 1996 to commemmorate the 200th anniversary of C. F. Martin Sr's birth. (Martin produced only 91 guitars in this commemorative series because the initial pre-WWII run of D-45s was also limited to 91 instruments.) Find out more  >>>

C. F. Martin has announced significant price increases as of February 1, 2016. We will continue to offer our in-stock Martin guitars at the old price. But when these are gone, the new prices will apply. If you have been considering a Martin guitar, now is the time to act!

Current Inventory

As of February 16, 2016 we have the following Martin instruments in stock. Click on a model number or just scroll down to see descriptions and photos of each instrument.

If you are interested in any of the instruments marked Arriving Soon!, just call or use our Ask Us! page and we'll let you know when they arrive.

Of course, we can also order other Martin guitar models for you.

In addition to these full-sized C. F. Martin instruments, we also have the LX1 solid spruce top small-bodied Martin.


It's finally back in stock - the Martin HD-28V, a beautiful Herringbone D-28 Dreadnaught with a huge, punchy sound and attractive vintage-style appointments.

Solid rosewood sides and back, Sitka spruce top, ebony bridge and fingerboard, 1-11/16 inch nut, a nicely shaped modern 'V' neck, herringbone binding and back stripe, vintage sytle tuners and saddle.

This instrument is a strummer's delight with its big volume - but at the same time it's clear and well balanced. Ready for your pickin' circle!


Martin upgraded the OM-21 in 2012. The new version features an ebony bridge and fingerboard, tinted solid spruce top, and vintage-style tuners.

The rest of the traditional OM-21 construction carries forward: All solid rosewood sides and back, 1-3/4 inch nut, the smaller teardrop-style pickguard, and a 25-1/2 inch scale neck.

The OM-21 has been one of our best selling guitars for a long time, and with good reason. It is a versatile instrument that works well for all playing styles - whether you strum, fingerpick, play country or jazz. The OM-21 can handle it all.


The D-41 is a classic Martin dreadnaught with just the right touch of elegance. With its rosewood back and sides and spruce top, this instrument has that big Martin sound that players crave: Plenty of depth in the bass but with clarity all the way through the range. The 1-11/16 inch nut, the low profile mahogany neck and the ebony fretboard are very comfortable to play.

The '41' series features abalone pearl on the rosette, purfling, and hexagon fretboard inlays. Compared to a '42' series Martin, you still get the 'bling' without setting fire to your wallet!

It's been a while since we've had a D-41 in our C. F. Martin collection and we're very excited to have it back.

GPCPA4 (Sapele)

This GPCPA4 is constructed of tone woods from responsible sources. The back and sides are made of solid sapele finished to a beautiful rich cherry color. The top is solid Sitka spruce. It has a 1-3/4 inch nut.

The instrument is equipped with a Fishman F-1 pickup system.

This combination of tone woods gives a nice warm sound with a snappy high end.

Attention left-handed players - we can get the GPCPA4 in a lefty version too!

GPC12PA4 12-String

This is the 12-string version of the GPCPA4. The construction and appointments are similar, except that the 12-string version has a 1-13/16 inch nut.

Like its 6-string cousin, the GPC12PA4 is equipped with a Fishman F-1 pickup system.

We find the GPC12PA4 to be a very playable 12-string with nice low action and a double helping of that characteristic full Martin sound.

T1K Koa Tenor Uke

Here's a nice solid-koa tenor uke at a reasonable price! Brighter, crisper tone than mahogany without being harsh. Satin lacquer finish. Includes Martin carrying bag.


The M-36 is a unique OOOO-size instrument, similar to a OOO or OM but with a significantly larger lower bout.

Construction is solid Indian rosewood sides, a nice three-piece solid Indian rosewood back, and a solid Sitka spruce top with an aged finish. It has a 1-11/16 inch nut.

This is a great guitar if you want a big driving, sound. Its tone holds together well even with heavy attacks.

The M-36 comes with a deluxe Martin hard case.


The GPCPA5K is a durable, affordable Martin instrument in the Performing Artist series. It is constructed with back and sides of koa-grained high pressure laminate and a solid Sitka spruce top. It has a 1-3/4 inch nut.

The Fishman pickup system and a cutaway make this guitar ready for stage performance.


The OOO-18 is another classic Martin design. Solid mahogany back and sides, Sitka spruce top. The nut is 1-11/16". Martin has upgraded the OOO-18 this year with an ebony bridge and fingerboard.

Although it is a small-bodied guitar, the OOO-18 doesn't sacrifice tone. It has a nice woody mahogany sound, great for fingerstyle or the singer/songwriter.


The OMCPA3 is an OM-size cutaway instrument with solid rosewood back and sides, a gloss Sitka spruce top, a nice fretboard inlay, and a 1-3/4 inch nut. The on-board Fishman F-1 Aura electronics include a tuner, volume and blend controls, independent EQ for the pickup and the Aura image signals, compressor, phase control, and an anti-feedback filter.

This is a great all-round guitar in a comfortable size for playing acoustic, plugged in at live gigs, or in the studio.


This is one our favorite and best-selling guitars. The "OO" size is extremely comfortable. Whether you are a smaller player or simply prefer a smaller-bodied instrument, the Martin OO-15M will not disappoint.

The OO-15M top, back and sides are solid mahogany for that rich Martin sound. The bridge and fingerboard are rosewood with a 1-11/16 inch nut. This guitar has a stunningly loud sound for a smaller instrument.

OO-15M (Left-handed)

We stock this left-handed version of the C. F. Martin OO-15M above, which is one of our favorite and most popular Martin instruments.

Some folks try to create a left-handed guitar by simply reversing the string positions. That won't work very well.

Our OO-15MLH is a true left-handed instrument - the bridge and nut are mirror images of those on a right-handed OO-15M. The left-handed bridge allows the strings to deliver proper intonation in their reversed positions, and the left-handed nut provides the correct notch width and depth for each string.

Quality left-handed guitars can be hard to find. If you play "lefty" and have been looking for a nice mahogany Martin, you need to come in and check this one out.


Martin Dreadnaughts always have a huge sound. This model has an eye-catching 3-piece back of solid ovangkol and rosewood. The sides are solid ovangkol. The top is Sitka spruce.

The DC-16GTE is equipped with a Roland pickup system with on-guitar EQ adjustments, reverb effects, and more. The cutaway gives the player easy access to the upper register.

This instrument is a great choice for the performing musician.


If you are looking for a smaller instrument that still has the famous Martin tone, you should try the OOO-28. Solid Indian rosewood back and sides. Sitka spruce top. Solid ebony fingerboard and bridge. Low-profile neck. 1-11/16 inch nut.

The OOO body size is not only narrower side-to-side but also thinner front-to-back, making a very comfortable instrument for the player with shorter arms. This is a compact guitar that still puts out a lot of rich, warm and characteristically Martin sound.


The GPCPA1 Plus is an acoustic-electric guitar in a Grand Performance body style. Solid East Indian rosewood back and sides, Sitka spruce top. Relatively wide 1-3/4 inch bone nut. Abalone rosette and fretboard inlays. Striking ovangkol binding on the body and neck. Tusq saddle.

The GPCPA1 Plus is fitted with the new Fishman F-1 Aura+ electronics and a Gold Plus undersaddle pickup. This combination is capable of modeling nine different professional studio microphone setups. The Aura+ adds an "easy mode" to the original Aura F-1 system, making it much simpler to find the sound you're looking for.

This guitar is very well balanced. You get the typical warm Martin sound but with sweeter highs, a combination that translates well when it is plugged in. The Fishman electronics sound full and rich.

This is an all-around versatile instrument for strumming and fingerpicking at home, in more intimate venues, and on stage.


The DCPA4 is a dreadnought size instrument with sapele back and sides and Sitka spruce top. It is equipped with Fishman F-1 electronics.

This guitar has a nice woody tone. It is a great choice for the performing musician at a price that won't break the bank.


Martin's original Dreadnaught model, the D-28 is a classic choice with all solid Indian rosewood sides and back, Sitka spruce top, and ebony bridge and fingerboard. 1-11/16 inch nut width.

True to its Martin pedigree, this guitar has a deep, rich tone with plenty of low end. It will handle pretty much anything you throw at it.


The HD-28 starts with the classic Martin Dreadnaught design in solid Indian rosewood back and sides and a Sitka spruce top. Then it adds herringbone trim and hand-scalloped interior bracing. The nut is 1-11/16 inches.

This guitar has lots of volume with very clear and balanced tone. Where the D-18 has more of a woody tone, the HD-28 is a bit smoother to play and the sound is more clear all the way through. The HD-28 is a great choice if you are looking for that characteristic Martin tone.


The D-16GT is an all solid wood Dreadnought. Mahogany back and sides. Sitka spruce top with a gloss finish. Big bassy tone. This guitar is similar to the sound of a D-18 but at a more affordable price.


The SWOMGT is an OM-style guitar in Martin's Sustainable Wood series. These instruments are made from ecologically grown woods including the solid cherry back and sides and the katalox fingerboard. Sitka spruce top. Tortoise binding and headplate. 1-3/4 inch nut.

This guitar is one of our favorites in the Martin line, having a unique yet identifiably Martin sound: Warm, but with a certain snappiness.


The SWDGT is the dreadnought version of the SWOMGT and is constructed from the same sustainable woods. It has a 1-11/16 inch nut.

Due to its larger dreadnought body size, the SWDGT has a deeper, boomy tone as compared to the OM-size SWOMGT.


The OMCPA4 is an OM-size cutaway instrument with sapele back and sides, Sitka spruce top, and a 1-3/4 inch nut. The on-board Fishman F-1 electronics can replicate the sound of 9 world-class studio microphones.

This guitar is the OM-size version of the DCPA4, making it more comfortable for the player looking for a smaller instrument. Like the DCPA4, the OMCPA4 is a great value for the performing artist.


This is another great-sounding smaller-bodied Martin. The sides and back are solid mahogany. The top is Sitka spruce, giving a slightly brighter tone than the OO-15M above. Its 1-11/16 inch nut combined with the OOO-size body makes this guitar very comfortable to play - a great C. F. Martin guitar at a price that won't break the bank.

D-18e Retro

The D-18 is Martin's long-standing classic mahogany dreadnought. With its big woody sound, you will defintiely be heard playing this guitar!

The D-18e Retro is the same basic instrument but with old-style binding and inlays that remind you of D-18's from years gone by. It has a solid Sitka spruce top, a 1-3/4 inch nut and forward-shifted "X" scalloped bracing.

Plus - the 'e' in the model designation means it is ready for the stage with Fishman F-1 Aura+ electronics.

If you are a mahogany fan, you can't go wrong with this guitar.


Always a popular choice! We love the look and feel of the all-mahogany Martin '15' Series. We typically stock the dreadnaught and OO sizes but we just received this nice OOO as well. More comfortable to play than the dreadnaught and with more volume than the OO, this guitar is the perfect middle ground.

Top, back and sides of solid mahogany, rosewood bridge and fingerboard, 1-11/16 inch nut width.

If you are looking for a big, dark Martin sound in a smaller package the OOO-15 will deliver. It will handle both strumming and fingerstyle playing equally well.


The D-15M is built to the same specifications as the OOO-15M except that it is a full-size Dreadnought. The instrument produces a lot of sound with a very strong bass register.

The D-15M is a great value if you are looking for a huge Martin sound at an affordable price.


Martin's Vintage Series guitars have a great old-time feel. All solid mahogany back and sides. Sitka spruce top. Like other Vintage Series instruments, the OO-18V has a wider neck than contemporary C. F. Martin OO instruments. 1-3/4 inch nut with a nice chunky V-profile neck.

The OO-18V is a smaller sized guitar that doesn't sacrifice tone. If you want a very comfortable guitar with a larger-profile neck, you should check out the OO-18V.


The D-35 is another classic and great-sounding C. F. Martin Dreadnought. Solid 3-piece Indian rosewood back. Rosewood sides. Solid Sitka spruce top. White binding on back and neck. Smooth-playing ebony fretboard.

This instrument easily produces the volume and full tone that is characteristic of Martin Dreadnoughts - great for all playing styles.


The DRS2 is Martin's most affordable solid-wood model and a great way to get into a Martin acoustic-electric without breaking your budget. It has a solid Sitka spruce top and solid sapele back and sides, a 1-11/16 inch nut, and comes equipped with Fishman Sonitone electronics.


The DRSGT is a great overall package for its price. Featuring an all-solid sapele back and sides with a solid spruce top, this is one of Martin's best values. The neck is solid African mahogany with a 1-11/16 inch nut.

Equipped with Fishman Sonitone USB electronics, this guitar can be plugged into an amp or house system for live performance or connected digitally to your Mac or PC for recording via USB.

This is a dreadnaught that delivers the big, boomy sound that Martin guitars are famous for. A sure winner!


The OOORSGT is similar to its dreadnaught-size brother above, but with a smaller and slimmer OOO body shape. Take away a bit of the low end of the DRSGT and add a bit more midrange and snap, and you have this guitar. It still has plenty of volume but is much more comfortable for the smaller player or someone who simply prefers a guitar with a smaller body size.

Like the DRSGT, the OOORSGT is a great value in a Martin acoustic-electric!


The DX1AE delivers that famous Martin sound at a really affordable price. Dreadnaught size, solid spruce top, high-pressure laminate back and sides, and 1-11/16 inch nut.

Equipped with Fishman Sonitone electronics.

Home |  About Us |  What's New? |  Used & Vintage |  New Instruments
Sheet Music |  Rentals |  Lessons |  Repairs |  Inquiries

The Minor Chord
222 Great Road
Littleton, MA 01460
Phone: 1-978-486-0112

©  2016 The Minor Chord.  All rights reserved.

Site Design by NetChromatics